Car Cracked Glass Repair Kit Windshield Tool Use for Camper Crack | Автомобили и мотоциклы

Car Cracked Glass Repair Kit Windshield Tool Use for Camper Crack | Автомобили и мотоциклы

Car Cracked Glass Repair Kit Car Windshield Repair Tool Use for Camper Windshield Glass Repair Car Windshield Glass Crack Repair

Description:
Before repair must see, enhances the success rate
In case of glass trauma, first stick with transparent adhesive tape to prevent the ash into the water
Buy our repair kit, so that you can get better results!(The repair effect of the complete set we sell is the best, while the repair effect of the four-piece set and the three-piece set is slightly different.)
(Note: The cleaner the wound is cleaned before repair, the better the repair effect will be!)
Don't fix it in the sun
Don't fix your car after washing it
Do not repair in rain or at night
After repair, ultraviolet radiation exposure,
Scratch white spot welding can not repair.

Use:

1. Clean broken parts: Use a needle or other tool to remove dirt and debris from the glass

2. Sticking positioning paste: Take out the positioning paste, tear off one side, and stick the double-side paste on the damaged part (be sure to clean the glass before sticking).
Make the damaged center in the middle of the double-sided position, smooth and press the double-sided paste with your hands.

3. Tear off the protective film: slowly tear off the protective film with even strength and slow speed.

4. Glue head: double-sided glue.Press with appropriate force to ensure the sealing effect

5. Filling repair solution: open the opening of the repair bottle with a blade, align the injection head, and add 4-5 drops of repair solution.

6. Connect the syringe: The syringe is connected to the injection head and rotates clockwise to ensure the sealing effect.

7. Vacuum/pressure: Vacuum negative pressure is generated in the rubber injection head of the pull-out compressor piston.Hold piston for 20 minutes (multiple repetitions).Remove the pressurizer, push the live seller to the maximum, insert the glue head back, and stick downward at the first bayonet for 15 minutes (repeat many times)

8. Take off the glue head
9. Remove remnants: Scrape them off at a 45-degree Angle with the complimentary blade.
10. Paste the curing film: drop 1-2 drops on the repaired part, quickly paste the curing film, and scrape and You push hard on the the back of the blade for 20 minutes in the sun. After the repair solution solidifies, remove the residual glue with the blade.


Package Contents:
Figure shows the number of sets