1.8Ax2 Brushed ESC Dual two-way Speed Controller 1:75 RC Tank 3.7v 1S N20 motor |

1.8Ax2 Brushed ESC Dual two-way Speed Controller 1:75 RC Tank 3.7v 1S N20 motor |

Description: 1.8A Brushed ESC Dual two-way Speed Controller 1:75 RC Tank 1S 3.7v N20 motor Electric current :1.8A Voltage :1s, 3.7v -6.5v Size: 16x18mm Features : Dual two-way ,mixed control, Differential turning (The motor can rotate forward and backward, and the tank can retreat.) This product, smaller size, 1S power supply Single road 1.8A, peak value 3.5A (generally the car of N20 deceleration unit is less than 1A, enough) The fixed position PWM 1500us (+50-50) in the remote control has the lowest run distance of 900-1100 and the highest 1900-2100 automatic adaptation, exceeding the neglect. Start with median point (throttle channel 1500, can hear the motor "Doodle", electrically adjustable start) With out-of-control protection (loss of signal (in the accident, the signal line is broken), in order to be safe and motor protection, it is necessary to return the throttle to the middle and re-unlock. Electric regulation has certain overcurrent and overheat protection Applicable voltage 2.9v-6.5v, with small white head battery (The power supply to the receiver is direct battery supply, and the electric regulation is also available at 2.9v, but the receiver may not be able to use it. The power supply mode is battery direct regulation/actuator/receiver power supply (three + - are connected) But when the motor rotates (current < 2A, 1S battery has voltage drop (e.g. 0.3v), it will not affect the servo/receiver power supply at this time; but if the motor current is large (3A), it may affect. (The default is mixed control, just connect the remote control throttle and steering)