Stepstick Drv8825 For RAMPS Stepper Motor Driver HeatSink Part 3D Printers Parts Heat Sink 4 Layer PCB Purple Board | Обустройство

Сохраните в закладки:

Цена:299,45RUB*

Количество:

Доставка в Эль-Монте, по России и СНГ


  • Stepstick Drv8825 For RAMPS Stepper Motor Driver HeatSink Part 3D Printers Parts Heat Sink 4 Layer PCB Purple Board | Обустройство - Фото №1
  • Stepstick Drv8825 For RAMPS Stepper Motor Driver HeatSink Part 3D Printers Parts Heat Sink 4 Layer PCB Purple Board | Обустройство - Фото №1
  • Stepstick Drv8825 For RAMPS Stepper Motor Driver HeatSink Part 3D Printers Parts Heat Sink 4 Layer PCB Purple Board | Обустройство - Фото №1
  • Stepstick Drv8825 For RAMPS Stepper Motor Driver HeatSink Part 3D Printers Parts Heat Sink 4 Layer PCB Purple Board | Обустройство - Фото №1
  • Stepstick Drv8825 For RAMPS Stepper Motor Driver HeatSink Part 3D Printers Parts Heat Sink 4 Layer PCB Purple Board | Обустройство - Фото №1
  • Stepstick Drv8825 For RAMPS Stepper Motor Driver HeatSink Part 3D Printers Parts Heat Sink 4 Layer PCB Purple Board | Обустройство - Фото №1
  • История цены

    *История изменения цены! Указанная стоимость возможно, уже изменилось. Проверить текущую цену - >

    Месяц Минимальная цена Макс. стоимость Цена
    Feb-20-2026 380.60 руб. 388.56 руб. 384 руб.
    Jan-20-2026 308.68 руб. 314.42 руб. 311 руб.
    Dec-20-2025 374.76 руб. 381.59 руб. 377.5 руб.
    Nov-20-2025 371.49 руб. 378.17 руб. 374.5 руб.
    Oct-20-2025 296.84 руб. 302.65 руб. 299 руб.
    Sep-20-2025 365.98 руб. 372.22 руб. 368.5 руб.
    Aug-20-2025 362.62 руб. 369.61 руб. 365.5 руб.
    Jul-20-2025 359.70 руб. 366.89 руб. 362.5 руб.

    Новые товары

    Характеристики

    Stepstick Drv8825 For RAMPS Stepper Motor Driver HeatSink Part 3D Printers Parts Heat Sink 4 Layer PCB Purple Board | Обустройство

    Описание товара

    Introduction:   The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver. The module has a pinout and interface that are nearly identical to those of our A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in replacement for those boards in many applications. The DRV8825 features adjustable current limiting, overcurrent and overtemperature protection, and six microstep resolutions (down to 1/32-step). It operates from 8.2 – 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (rated for up to 2.2 A per coil with sufficient additional cooling).       Features:   Simple step and direction control interface Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step Can interface directly with 3.3 V and 5 V systems Over-temperature thermal shutdown, over-current shutdown, and under-voltage lockout Short-to-ground and shorted-load protection 4-layer, 2 oz copper PCB for improved heat dissipation Exposed solderable ground pad below the driver IC on the bottom of the PCB Module size, pinout, and interface match those of our A4988 stepper motor driver carriers in most respects (see the bottom of this page for more information) Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay) 45 V maximum supply voltage Built-in regulator (no external logic voltage supply needed)       20181106_151559_01120181106_151559_01220181106_151559_01620181106_151559_01320181106_151559_01420181106_151559_015


    Трекер стоимости


    Отзывы покупателей

    Новые отзывы о товарах

    аким 23 Ноября 2022, 20:11 #

    продавец мошенник рекламирует магнитолу с одной комплектацией высылает с другой более дешевой .после спора делает круглые глаза прикидывается шлангом и... Читать отзыв полностью...

    Dmytro Doroshenko Stereomaydan Synelnykove 14 Ноября 2022, 21:56 #

    Здравствуйте радиолампы для Аудио Усилителей Hello Vacuum Tubes For Audio Amplifiers Все на Планете кто торгует МОИМИ TUBES SVETLANA... Читать отзыв полностью...

    Ренат 30 Июля 2022, 13:55 #

    Этот нож ещё появится в продаже? Хочу купить... Читать отзыв полностью...

    Мария 18 Декабря 2021, 17:25 #

    Искала что-то такое цвета а-ля Барби. А тут еще и серебристая оторочка, и блейзер выглядит совсем гламурно. Подкладка с розами... Читать отзыв полностью...

    Евгения 18 Декабря 2021, 21:55 #

    Товар прибыл быстро и отличного качеств, я даже не ожидала. Ручка выполнена из чистого изоляционного полипропилена + оказалась приятна на... Читать отзыв полностью...

    Нина Сизова 23 Декабря 2021, 13:04 #

    Замечательная коса гораздо удобнее чем стандартные бортики на завязках. Выглядит очень эстетично, легкая, приятная на ощупь, стирается без проблем. Плюс... Читать отзыв полностью...

    Виктория 18 Декабря 2021, 19:19 #

    Заказала две оригинальные устойчивые удобные подставки для книг в форме кактуса, изготовленные из чугуна. Теперь на моем письменном столе полный... Читать отзыв полностью...


    Отзывы о Stepstick Drv8825 For RAMPS Stepper Motor Driver HeatSink Part 3D Printers Parts Heat Sink 4 Layer PCB Purple Board | Обустройство

    Данную страницу никто не комментировал. Вы можете стать первым.
    Введите символы или вычислите пример:
    captcha