QHD 2K 6inch Portable Monitor 1440*2560 RGB LCD Display Built-in Battery Power Output Tpye-C for PC External Screen Raspberry PI | Мобильные

QHD 2K 6inch Portable Monitor 1440*2560 RGB LCD Display Built-in Battery Power Output Tpye-C for PC External Screen Raspberry PI | Мобильные

2K QHD 6" inch 1440*2560 QHD RGB Portable Monitor LCD Display Screen Panel Built-in 5000mAh Battery Power Output Tpye-C for External Screen Raspberry PI 3B 4B PC

Packing List

1 * 6 Inch 2K QHD LCD Screen

1 * Signal Cable

1 * Type-C cable

Monitor Feature:

2K 6 inch QHD IPS Screen Display,

resolution 1440X2560 QHD,

Support multi-monitor splicing screen.

Built-in battery, only need to input signal cable can work.

The monitor can act as a power bank.

5000 mAh battery,

with 18W fast charging protocol,

can input and output at the same time, (when charging the battery, the display can be used at the same time)

Note: The display only supports computers (X86 architecture) or Raspberry Pi. If you need to use an Android device, you need to add low-level HDMI output parameters (the developer can only achieve this). For Raspberry Pi, we provide configuration files that can be obtained from the purchaser.

Power bank parameters:

The capacity is 5000mAh, and the USB-A port can output 5V 3A, 9V 2A, 12V 1.5A.

A highly integrated multi-protocol two-way fast charging mobile power bank dedicated all-in-one chip, supporting any A+A+B+C+L port Quick charge.

It integrates 5A high-efficiency switch charging,

22.5W high-efficiency synchronous boost output, PPS/PD/QC/AFC/FCP/SCP/PE/SFCP/low-voltage direct charging and other fast charging protocols,

electricity metering,

digital tube/LED Light display

Original Sharp 6-inch LCD screen parameters