SUNLU Resin 3D 405nm 1kg Printer LCD UV-Curing Standard Photopolymer For Printing | Компьютеры и офис

SUNLU Resin 3D 405nm 1kg Printer LCD UV-Curing Standard Photopolymer For Printing | Компьютеры и офис

【Upgraded Color】Special designed for LCD 3D Printer to achieve better printing quality. With high quality pigments, the models printed with SUNLU resin have a very pure and stunning color effect just like an artwork.

【Low Shrinkage and Great Stability】 Lower shrinkage and great stability printed parts will have high detail with no deformation or noticeable shrinkage and the final cured pieces are strong without being brittle, Easy removal of support.Its excellent stability ensures successful 3D resin printing

【Fast Printing Speed and Excellent Fluidity】 the SUNLU rapid resin has excellent fluidity which greatly reduce the printing time while producing a consistent result, making it your go-to option for 3D resin.Recommend Print Parameter: Bottom Exposure Time: 60s / Bottom Layers: 3 / Normal Exposure Time: 8s

【Wide Compatibility】 Given the outstanding performances，The general-purpose resin is compatible with most 405nm wavelength LCD/SLA resin printers on the market. Including SainSmart KL9, Elegoo Mars, Creality LD002R, Anycubic Photon, Phrozen Shuffle, and similar 3D printers.

【Safe and Secure】Instead of commonly used plastic bottles, SUNLU uses solid, leakproof and airtight aluminum container for the resin to prevent dent and breakage.One-month free trial, 30 day Money-back if you’re not satisfied.

Notes:
1. Shake well before use. It is recommended to stand upside down three times. It is forbidden to use resin in places exposed to sunlight.
2. Do not take orally. Keep away from children. Wear gloves before use to avoid direct contact with skin and maintain indoor ventilation; Do not get into eyes. In case of accidental contact, rinse with plenty of water as soon as possible. In case of discomfort, seek medical advice in time.  
3. The printed resin model needs to be cleaned with high concentration alcohol (above 95% concentration is recommended, the higher the better) for about 30s; After cleaning to dry alcohol after secondary curing, so as to get the best performance.
4. The used resin in the chute shall not be put back into the unused resin, and the resin shall not be placed in the chute for a long time(if not for a long time, the resin can be imported into the container and sealed with plastic wrap for shading preservation), so as to avoid the contamination of the resin to affect the printing effect.
5. Store it away from light at room temperature. The sun contains ultraviolet rays, which will cure the photosensitive resin; It is recommended to store it at an ambient temperature of 15-35 ℃. The lower the temperature in winter, the higher the resin viscosity.
6. Sealed and stored to avoid dust or moisture, which will affect the printing quality.