KLS7230N 40V-72V 270A SINUSOIDAL BRUSHLESS MOTOR Kelly CONTROLLER For Hub Motor | Автомобили и мотоциклы

KLS7230N 40V-72V 270A SINUSOIDAL BRUSHLESS MOTOR Kelly CONTROLLER For Hub Motor | Автомобили и мотоциклы

It's special design for QS BLDC motor controller for Conversion Kits, Which can match QS hub motor.

If you need other models, please kindly contact seller to get a solution.

Key Features

1). Very Easy connect

2). Can match with almost brushless DC motor

3). Quality Guarantee(generally no after-sale issue)

4). Programmable

Configurable battery voltage range, B+. Max operating range: 40V to 80V.

Motor Current Limit, 30 seconds: 270A.

Motor Current Limit, continuous: 90A.

Frequency of Operation: 10 kHz or 20 kHz.

Standby Battery Current: < 0.5mA.

5V or 12V Sensor Supply Current: 40mA.

Controller supply voltage range: PWR, 40V to 90V for controllers rated equal or lower than 72V.

Supply Current, PWR, 30mA Typical.

Configurable battery voltage range, B+. Max operating range: 30V to 1.25*Nominal Voltage.

Standard Throttle Input: 0-5 Volts (3-wire resistive pot), 1-4 Volts (hall active throttle).

Throttle Input: 0-5 Volts. Can use 3-wire pot to produce 0-5V signal.

Full Power Operating Temperature Range: 0℃ to 70℃ (MOSFET temperature).

Operating Temperature Range: -40℃to 100℃ (MOSFET temperature).

Max Battery Current: Configurable

2.Drawing of controller:

Here is drawing of our normal QSKLS7230N controller,194mm*126mm*72.5mm

3.Kelly Controller Software Interface

Here are the clear and easy adjustment software interface.

DJ7091Y-2.3-11 Pin Definition

(14) REV_SW: Reverse switch input. Orange

(6) RTN: Signal return or power supply return. Black

(12) FWD: Forward switch or can be enabled as High speed switch function. White

(11) 12V:12V Source Red

(25) 12V brake switch. Yellowish

(22) ECO: Low speed switch function. Blue

(33)CAN-H:Greenish(Optional function)

(7) PWR: Controller power supply (input). Pink

(34)CAN-L:Brownish(Optional function)

DJ7091Y-2.3-21 Pin Definition

(15) Micro_SW: Throttle switch input. Gray

(3) Throttle: Throttle analog input, 0-5V. Dark Green

(20) RTN: Signal return. Black

(8) Meter: Copy signal of hall sensors. Dark Gray

(4) 5V: 5V supply output, <40mA. Purple

(2) Brake_AN：Brake variable regen or Boost function. Brown

DJ7061Y-2.3-21 Pin Definition

(21) RTN:Signal return. Black

(1) Temp: Motor temperature sensor input. Raddle.

(5) 5V: 5V supply output,<40mA.Purple

(18) Hall A: Hall phase A. Yellow

(17) Hall B: Hall phase B. Dark Green

(16) Hall C: Hall phase C. Dark Blue

Notes:

1. All RTN pins are internally connected.

2. Meter function is to copy either of hall sensors.

3. Switch to 12V is active. Open switch is inactive.

4. F-N-R control and three speed function can not be used at the same time.They both

used the same pin as pin12=FWD

Pls. contact with sales first if you don't know how to connect the controller with motor and other parts.

5.Questions before order

1). If you want to buy the controller separately, please advise us the parameters of your matching motor?

Such as Motor Voltage, Wattage, Speed...

2). If you need any other special functions for this controller, please feel free to contact to us. Thank you!

If you are interested on more models of controller, pls. refer to below data sheet, and click the hyperlink of picture.

Kelly KL S-N Brushless Motor Controller

Model

30 Seconds Current(Amp)

Continuous Current(Amp)

Voltage(Volt)

KLS7212N

160A

60A

30-72V

KLS7215N

180A

70A

30-72V

KLS6018N

220A

80A

30-60V

KLS7218N

220A

80A

30-72V

KLS7222N

250A

80A

30-72V

KLS7230N

270A

90A

30-72V

KLS6030N

270A

90A

30-60V

KLS7245N

350A

100A

30-72V

KLS7250N

380A

110A

30-72V

60V model: range of the batteries voltage is 30V-80V.

72V model: range of the batteries voltage is 30V-90V.