Mach3 CNC Router 4 Axis kit mach3 USB controller board 100K+ 4pcs TB6600 driver+ 2NM nema23 stepper motor+36V power supply | Инструменты

Mach3 CNC Router 4 Axis kit mach3 USB controller board 100K+ 4pcs TB6600 driver+ 2NM nema23 stepper motor+36V power supply | Инструменты

Package Includes

1 x 36V/10A switching power supply 4 x 1 Axis TB6600 stepper motor driver 4 x NEMA23 3A 312 oz/in stepper motor 1 x mach3 USB stepper motor controller board 1 x USB cable Note (random color) English user manual will send by a CD or Email

Product Description :

Breakout board Description :

1. Support for 4-axis linkage, you can connect four stepper motor drives or servo drives; 2. Maximum step-pulse frequency is 100KHz,which is suitable for the servo or stepping motor; 3. Support automatic probe tool 4. Support Emergency input 5. Support for limit switch 6. Support for connecting electronic handwheel 7. Need use external 24V DC power supply to isolate USB and external port, and to make the system more stable. 8. Have 0-10V output port, you can use mach3 software to control the spindle motor speed. 9. 4 general-purpose inputs, you can connect the limit switch, estop switch, probe switch, back to zero and other device 10. 4 general-purpose isolated relay drive output interface, can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps and other device; 11. 1 status LED, indicate connection status on the board.

TB6600 Single Axis Stepper Motor Driver Features：

High performance, cost-effective. Automatic idle-current reduction. Supply voltage up to 50V DC Output current up to 5.0A. Suitable for 2-phase and 4-phase motors. High speed optoelectronic isolation signal input. Single-chip PWM bipolar sinusoidal chopper ensures low vibration and high efficiency. 1, 2, 4 (New Mode), 8, 16 adjustable microstep control, motors run more precisely and smoothly. Equipped with the 3rd generation of breakout board, display panel and control pad to control the motor manually. Overload, overcurrent, overheat, overvoltage and undervoltage protection to avoid damaging your computer and devices. Cooling Aluminium Box Design for Cooling, and protect the driver board from being damaged by dirt, dust or other liquids This item is a high performance micro-stepping driver based on the latest original TOSHIBA high-efficiency TB6600HG IC. The TB6600HG adopts single-chip PWM bipolar sinusoidal chopper to ensure the low vibration and high efficiency. Moreover, the brand new design with BiCD0.13 (50V) process technology on the chipset also ensures maximum 5.0A output current and 50V output withstand voltage. Consequently, as long as the current range of the stepper motor is within 0.2-5 amps, all the 2 Phase or 4 Phase of Nema17, Nema23, Nema24 and Nema34 stepper motors will work perfectly with this new-type TB6600HG Stepper Driver - average current control, two-phase sinusoidal current drive output - DC 12 ~ 48V power supply, the internal integration of 12V and 5V regulator - optically isolated signal input / output - overvoltage, undervoltage, overcurrent, and white short-circuit protection - Input voltage DC 12 ~ 48V input - The input current of 1 to 5 amps, select the drive a stepper motor. - Output current of 0.2A ~ 5A - Temperature Operating Temperature -10 to 45 C; Storage temperature -40C to 70C - Humidity not condensing, not drops - Gas prohibit combustible gas and conductive dust

nema23 stepper motor Features：

Switching power supply Description:

1. the range of AC input voltage is changed by the switch 2. high-efficiency, high reliability 3.100% full load burn-in test 4. Protections: Short circuit / overload / over voltage / over temperature 5. built-in cooling DC fan control 6. Working frequency is 25 kHz 7.Input Voltage:220V 8. Output Voltage:36V 9. Output Current:10A 10.Output Power:350W