S685ZZ Bearing 5*11*5 mm ( 10 PCS ) 440C Roller Stainless Steel S685Z S685 Z ZZ Ball Bearings | Спорт и развлечения

S685ZZ Bearing 5*11*5 mm ( 10 PCS ) 440C Roller Stainless Steel S685Z S685 Z ZZ Ball Bearings | Спорт и развлечения

WHY 440C STAINLESS steel?

Good corrosion resistance to water and many weak chemicals
Corrosion resistance can be improved by passivation
Good for temperatures up to 300°C

Slightly softer than chrome steel so lower load ratings
Will corrode in salt water or salt spray and poor resistance to acids/alkalis
More expensive than chrome steel

TECHNICAL SPECS

Item: S685ZZ
Structure: Deep Groove
Material: 440C Stainless Steel ( prefix "S" )
Bore Dia (d): 5 mm
Outer Dia (D): 11 mm
Width (B): 5 mm
Closures: Metal Shielded(ZZ)
Lubrication: Grease
Magnetic: little
Hardness: 58HRC
Corrosion Resistance: General
Clearance: C0
Grades: ABEC Grades 1
Dynamic Load Rating (Cr) (Newtons): 609
Static Load Rating (Cor) (Newtons): 226
Ball Qty: 8
Ball Dia (Dw): 1.588 mm
Weight: 1.93 g
Quantity: 1 Lot = 10 PCS

What is 440C?

A martensitic stainless steel. It's composed of these major alloy elements (I don't list the minor elements since they don't play a major role):
Carbon: 0.95-1.25% This increases hardenability and wear resistance, but decreases toughness in higher amounts.
Manganese: 45% This is added to reduce brittleness and improve forgeability, hardenability, and reducing deformation.
Silicon: 30% This is a deoxidizer and improves hot-forming properties.
Chromium: 17.00-18.00% Added only to high alloy tool steels, this improves hardenability, high wear resistance, toughness, and corrosion resistance.
Molybdenum: 50% Improves deep hardening and toughness.

These basic elements (along with iron) are a simple combination that works well together, and has for many decades.
This alloy is technically classified as UNS (Unified Numbering System) S44044. It's also classified as SAE (Society for Automotive Engineers) as 51440C.
The American Iron and Steel Institute classifies it as 440C martensitic standard stainless steel. Most modern knifemakers simply call it 440C.

DIMENSIONS

F A Q

1.WHY DO THE BEARINGS I RECEIVE HAVE SHAKING?

The clearance of the bearing is related to the play.
The default is the standard C0 clearance, which is usually 3-18um.
The corresponding principle is shown in the figure below.
If you don't need to shake, please choose C2 small clearance bearing,
If you have any questions, please contact us before purchasing.

2.WHAT IS THE ACCURACY OF ABEC-1

ABEC is the American ANSI standard.
The corresponding German DIN standard and international ISO standard are as follows:

3.DO YOU PROVIDE LOGISTICS TRACKING INFORMATION?

Yes, all our products provide full logistics tracking,
And the products you buy are all new. We will buy transportation insurance for you.
If the product is damaged or lost during transportation, you can get paid.